This special machine has been designed, built and tested for the assembly or disassembly of the "extension packages" of various crane sizes. The machine has three hydraulically actuated control axes : No. 2 pairs of synchronized clamps for horizontal centering and locking the primary extension; No. 1 sliding and positionable stabilizer for vertical locking of the primary extension; No. 1 long-stroke introducer for the longitudinal controlled introduction and/or extraction of

Equipment specifically designed for the barycentric lifting of various formats . It is equipped with a manual vice with double...

This was a very important project realized with a study and feasibility time of about two months and complete realization in just four...

This insert press is specifically designed for press-fitting various types of bushings . It is hung and powered by compressed air. The...

Lifting capacity 150 kg Minimum socket diameter 320 mm Maximum socket diameter 380 mm This equipment has been designed for the internal...

This urgently completed project concerns an assembly line for burners of various and small sizes. The line is compact, modular and...

This equipment has been specifically designed to allow the longitudinal positioning of various semi-finished products on a robotic...

The purpose of this configurable equipment is the correct positioning of two semi-finished bodies that define the main arms of some...

MAX LOAD 100 Kg The equipment has been designed to allow the barycentric lifting of certain loads with an indicated maximum weight. The...

This special equipment has been designed to allow the correct positioning of the parts that make up various products during welding...

This equipment has the function of safely compressing a gas spring during the assembly phase in line. MAX LOAD 600 N The effort...

MAX COMPRESSION 200 Kg Torque max 7,5 Nm This equipment has the function of safely compressing a gas spring during the assembly phase in...

This equipment has the function of safely compressing a gas spring during the assembly phase in line. The effort reduction is equal to...

This special tool has been designed to ensure the correct positioning of the rocker arm rods on a 4-cylinder engine during in-line...

This wheeled platform can be towed and has the function of supporting and transporting a specific frame during assembly and coupling phases.

This equipment has the purpose of ensure a correct positioning and assembly of an assembled pillars group on the traction frame. The...